WORK ALL METAL CO.,LTD.
	We serve all your requirements
Home	Products	Services	Download	Contact	About
					Products list:- MV bus duct LV bus duct SF6 load break switch Air load break switch Ring main unit Termination kit Insulated flexible bar MV capacitor LV capacitor PF controller Capacitor contactor HRC Fuse and base Automatic transfer switch ACB, MCCB, MCB Contactor Laminate flexible bar Braid flexible bar Neutral Grounding Resistor Neutral Earthing Resistor Neutral Grounding Transformer Power resistor Load bank Harmonic filter Starting or Breaking resistor Brands list:- SUMITOMO SUMIDEN ASAHI NISSIN SAT LKE FRANKE GE ZENITH CONTROL ABB FEDERAL TECHNOELECTRIC NTN RESISTOR RAYCHEM METAL DEPLOYE M.S. RESISTANCE POWEROHM HILKAR LINGO ERICO / ERIFLEX CRESSALL
	Application of Flexible bar Using high quality of flat braided conductors, ASAHI's Flexible Conductors are very flexible. From their capability of buffering vibration forces, they are effective to prevent loosening of affixing bolts and nuts and screws due to power supplying transformer's vibration as well as to absorb or moderate shocks due to mechanical causes including earthquakes. Hence, ASAHI's Flexible Conductors prevent or reduce damages of bus bars and other electric units as a consequence of electrical or mechanical vibrations or shocks. Moreover, they facilitate dimension adjustment, direction change and between units in electrical construction works. Product information When you request our information on the product prince, please designate the Type No. shown in the standard dimension table. You can specify arbitrary dimension except for the terminal width (which should be selected among 25, 40, 50, 75, 100, 150 and 200 mm), together with the specifications listed below:     1.    Current carrying capacity or nominal cross-sectional area     2.    Terminal width     3.    Dimensions of various portions     4.    Quantity and delivery date The terminal portion is tin-plated if not otherwise specified. (If you want silver-plating, please specify it without fail.) If you want insulator coating, please inform us. (The insulator shall be polyvinyl chloride.) Selection of Flexible bar   In selecting the type or design of flexible conductor, please be noted on the following : 1. Determine the braided wire length (B) longer by 5 to 10 mm. than that required from bus bar layout so as to secure an allowance in installation. (for prevention of insufficient flexibility occurrence in use) (Refer to the figure on the right.) 2. Select diameters of the terminal holes among ø10, ø12, ø14, ø15, ø16, ø18, and ø20.5. Download catalogue
Home	Products	Services	Download	Contact	About
Address: 1995 Moo 3 Sukhumvit Road, Tambol Taibanmai, Muang, Samut prakan 10280 Thailand
Tel: (66)081 694 9521, (66)081 315 3833, (66)088 531 6096, (66)087 695 2390 Fax: (66) 0 2702 2895 E-mail: wam@workallmetal.com

HTML Hit Counter